Recording Menu 4 - Panasonic HX-DC3 Owner's Manual

[FOCUS MODE]
You can select the focusing method according to the position of the
subject.
# [FOCUS MODE] # desired setting
[MENU]:
3
(9-PT AUTOFOCUS):
(SPOT FOCUS):

RECORDING MENU 4

4
[METERING MODE]
You can change the light-metering method used to measure brightness.
# [METERING MODE] # desired setting
[MENU]:
2 4
(MULTI):
(CENTER):
(SPOT):
≥ [SCENE MODE] will be set to
is set to (CENTER) or
(l 66) is set to
The unit determines the focus
automatically from 9 focus points (
in the recording range.
The unit focuses on the subject over the
focus mark (
center of the LCD monitor.
The unit automatically assesses the
distribution of brightness over the
screen and meters to ensure that the
exposure is appropriate.
The unit averages light measurements over
the entire screen, giving higher weight to the
subject at the center of the screen.
The unit meters the subject over spot
meter target (
center of the LCD monitor.
(OFF) when the [METERING MODE]
(SPOT) while the [SCENE MODE]
(HDR Backlight Comp.).
- 75 -
) displayed at the
) displayed at the
)