Selecting Files To Transfer - Panasonic HX-DC3 Owner's Manual

∫ Selecting files to transfer

If you perform the required settings in advance on your PC, you can
transfer selected files alone. For settings methods etc., please read the
card operating instructions or consult the card manufacturer.
≥ Install the software supplied with the Eye-Fi card on your PC, and
configure the selection transfer settings.
≥ Insert the Eye-Fi card.
Select the menu.
# [TRANSFER/PROTECT]
[MENU]:
1
≥ The settings method is the same as for the protect settings. (l 103)
≥ For the files set for selected transfer,
thumbnail screen (1-file display).
≥ If you have not performed selected transfer settings on your PC,
[PROTECT] is displayed and the selection transfer setting is disabled.
≥ When the write protect switch on the Eye-Fi card is on the LOCK side,
[PROTECT] is displayed and selected transfer setting is disabled.
Please unlock the write protect switch.
≥ The protect setting is also applied to the files for which [TRANSFER/
PROTECT] is set. To delete or rotate a file, first cancel [TRANSFER/
PROTECT] and then perform the operation.
is displayed on the
- 136 -