Loading The Batteries; I Hook Ups; Connecting To A Tv Using A Video Out Jack Or A S-Video Out Jack - Emerson EWD7003 Owner's Manual

FUNCTIONAL OVERVIEW

Loading the Batteries

1. Open the battery compartment cover.
2. Insert two AA batteries, with each one oriented correctly.
3. Close the cover.
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
HOOK UPS
CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colors of the jacks and plugs match up when using VIDEO/AUDIO cables.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programs.

Connecting to a TV using a VIDEO OUT Jack or a S-VIDEO OUT Jack

Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy pictures of higher quality.
A/V-compatible or
wide screen TV
Stereo system
To Right (red) and Left (white)
AUDIO OUT jacks
To Right (red) and Left (white)
AUDIO INPUT jacks
To VIDEO INPUT jack
To S-VIDEO INPUT jack
AUDIO OUT
DIGITAL AUDIO
OUT PCM/
BITSTREAM
To Right (red) and
Left (white) ANALOG
COAXIAL
AUDIO INPUT jacks
To Right (red) and Left
(white) AUDIO OUT jacks
AUDIO OUT L Y Cr COMPONENT
VIDEO OUT
DIGITAL AUDIO
OUT PCM/
BITSTREAM
COAXIAL
R VIDEO Cb S-VIDEO OUT
OUT
To S-VIDEO OUT jack
To VIDEO OUT jack
or
To S-VIDEO OUT jack
L Y Cr COMPONENT
VIDEO OUT
R VIDEO Cb S-VIDEO OUT
OUT
To VIDEO OUT jack To VIDEO INPUT jack
– 7 –
[Fig. 4]
To S-VIDEO INPUT jack
A/V-compatible
or
wide screen TV
or
[Fig. 5]
EN