Hitachi CM821FET User Manual page 16

OPERATION (Continued)
Table 1-1. Adjustment Table (Continued)
Item
(SCREEN MENU)
H. FOCUS
V. FOCUS
TOP CORNER
BOTTOM CORNER
H.CONV.
V.CONV.
V. LINEARITY
V. LIN. BALANCE
HEMISPHERE
RECALL MENU
SINGLE RECALL
TOTAL RESET
(Continued on the next page.)
1 - 14
Adjustment
button
makes the horizontal dynamic focus weaker.
makes the horizontal dynamic focus stronger.
makes the vertical dynamic focus weaker.
makes the vertical dynamic focus stronger.
curves the left and right top corners of the picture
inwards.
curves the left and right top corners of the picture
outwards.
curves the left and right bottom corners of the
picture inwards.
curves the left and right bottom corners of the
picture outwards.
moves red to the left and blue to the right.
moves red to the right and blue to the left.
moves red down and blue up.
moves red up and blue down.
expands the top and the bottom of the picture
vertically.
shrinks the top and the bottom of the picture
vertically.
shrinks the top and expands the bottom of the
picture vertically.
expands the top and shrinks the bottom of the
picture vertically.
set the northern hemisphere mode. (N)
set the southern hemisphere mode. (S)
changes to the previous mode.
TOTAL RESET •Ì SINGLE RECALL
changes to the next mode.
SINGLE RECALL •Ì TOTAL RESET
(unavailable) (NO)
recalls the default settings for the current signal
mode only. (YES)
(unavailable) (NO)
recalls all factory settings and deletes the all user
settings. (YES)
To activate the TOTAL RESET command, you will
begin by pressing the button
OSD background will be red. To apply the TOTAL
RESET, simply press the button
user data will be erased.
Function
. At this time the
again and all