Hitachi CM821FET User Manual page 12

Brightness/Contrast Adjustment
(1) Press one of the adjustment buttons when the OSD
(On Screen Display) is not shown. The OSD function
"EasyMenu" will then show the brightness and
contrast settings.
(2) To adjust these settings, use the adjustment buttons
/ for brightness, and
Other Functions
(1) Press the menu button when the OSD is not shown.
The OSD function "EasyMenu" will then show the
main menu. The EasyMenu has 4 submenus (Screen
Menu, Recall Menu, OSD Menu and Colour Menu).
You can call these up through the main menu
functions .
(2) To select the menu function, use the adjustment
buttons / .
(3) To execute the selected function, use the adjustment
buttons / as shown in Table 1-1.
NOTE:
You can select the OSD language by using the "LANGUAGE SELECT" function of
the "OSD MENU".
To return to the main menu from any sub menu, simply press the menu button.
To clear the OSD, press the menu button at the main menu, then choose the "OSD
EXIT" function, or wait for a few seconds, the menu window will disappear
automatically.
The adjusted settings will be stored automatically. The OSD might flicker on and
off for a short period while the OSD is displayed in certain screen settings. This
phenomenon is not a failure. Simply move the OSD position a little up or down,
and the OSD will become stable.
1 - 10
/ for contrast.
Brightness/Contrast Menu
Main Menu