Thumbnail Display - Hitachi HDC-886E Instruction Manual

VIDEO MODE
Recording Video Clips
This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pix-
els. Voice can also be recorded.
1. Set the camera mode to [w].
2. Compose the image.
3. Press the shutter button.
The recording of the video clip will start.
Pressing the shutter button one more time will
end the recording of the video clip.
The recording time depends on the storage
size and the subject of the image to be
recorded.
The zoom function cannot be used during
video recording.
Playing Back Video Clips
You can play back recorded video clips on the camera.
1. Set the camera mode to [x].
The last image appears on the screen.
2. Select the desired video clip with the
3. Press the SCN/SET button.
A press of the / buttons during playback allows fast forward play / fast
reverse play.
To stop video playback, press the
This stops playback and returns to the start of the video clip.
To pause video playback, press the SCN/SET button.
This pauses video playback.
To cancel pause, press the SCN/SET button again.
/ buttons.
button.
EN-7
PLAYBACK MODE
Playing Back Still Images
You can play back the still images on the LCD monitor.
1. Set the camera mode to [x].
The last image appears on the screen.
2. The images can be displayed in reverse or
forward sequence with the / buttons.
To view the previous image, press the
button.
To view the next image, press the
Pressing the button enlarges the image.
To return to normal magnification, press the
button.

Thumbnail Display

This function allows you to view 9 thumbnail images on the LCD monitor at the same
time, which can let you quickly search for the image that you want.
1. Set the camera mode to [x].
The last image appears on the screen.
2. Press the button.
The images are displayed in the thumbnail
display.
Images that have been selected with the
/ / / buttons will be indicated by a
yellow frame.
When there are ten or more images, scroll
the screen with the / buttons.
3. Press the / / / buttons to select the image to be displayed at regular size.
4. Press the SCN/SET button.
The selected image is displayed at its regular size.
button.
x1.5
EN-8