Advertisement
HOW TO USE
Auto480
Signal cable for IBM Personal System/2 or Equivalents
is fixed to the monitor base.
Connect the signal cable to the IBM Personal System/2 video output
15-pin connector.
* IBM, IBM Personal
System/2
are registered
trade marks of International
Business
Machines Corporation.
11( ,
. )11
.
?
/
/
//'-j
//
I
P
//
@G&j
p*~~
s~TcH
Press to turn the power ON.
Press again to turn the power OFF.
-
POWER ON INDICATOR
A green light comes on when the power is
ON.
=
BRIGHTNESS
CONTROL
Adjust this to set the back ground bright-
ness so that the back raster is just di-
minished.
-
CONTRAST C(3NTROL
Adjust this to obtain required brightness.
~
AC INLET
Connect a power cord set here.
~
TILT&
SWIVEL BASE
Adjust
tilt or swivel to obtain
proper
angle.
@
SIGNAL CABLE AND
CONNECTOR
Connect
this
comector
end
to your
computer.
Advertisement
