Advertisement
Cautions when using Auto 480
WARNINGS
NEVER REMOVE THE BACK COVER
Removal of the back cover shall be done only by qualified personnel.
Inside of this display monitor contains high voltage.
USE CORRECT VOLTAGE
Use only 220/240 volts, 50Hz power line with safety grounded outlet only.
Extremely
high or low power voltage may cause trouble
or may not give optimum performance.
DO NOT USE AT WRONG PLACE
To prevent shock or fire hazard, DO NOT expose the Auto 480 display monitor to rain
or moisture.
This unit is designed to be used in offices or homes.
DO NOT subject the unit to vibra-
tions, dust or corrosive gases.
KEEP IN A WELL VENTILATED
PLACE
Ventilation
holes are provided on the cabinet to prevent the temperature
from rising.
DO NOT cover the unit or place anything on top of the unit.
AVOID HEAT
Avoid placing the unit in direct sunshine or near heating appliance.
BE CAREFUL OF MAGNETIC FIELDS
Do not place a magnet, speaker system, printer, floppy disc drive or anything which will
generate magnetism near the unit.
A magnetic field may cause blurred colours or distor-
tion of the displayed pattern.
4
Advertisement
