Advertisement
POWER SOURCE
This colour display is designed to operate on 220/240
volts 50 Hz, AC. Insert the
power cord plug into a 220/240 volts 50 Hz safety grounded outlet.
DO NOT CONNECT
THE DISPLAY
TO OTHER
THAN THE SPECI-
FIED VOLTAGE.
Never remove the back cover of the display as this can expose you to very high
voltage and other hazards.
If the display does not operate properly, unplug the
display and call your dealer.
NOTES:
1.
This colour display is equipped
with a three-wire plug. This plug will
only fit into a grounded power outlet.
This is a safety feature, do not
defeat the safety purpose of the grounded plug.
2. If the power cord or plug is damaged or frayed, replace it.
3. Do not overload wall outlets
or extension
cords as this can result in
fire or electric shock.
WARNING:
TO PREVENT
SHOCK
OR FIRE HAZARD, DO NOT EXPOSE THIS
DISPLAY TO RAIN OR MOISTURE.
TABLE OF CONTENTS
INTRODUCTION
SPECIFICATIONS
Genera l..........,.""...""""
3
Specifications
. . . . . . . . . . . . . ...10
Features
. . . . - . . . . . ."""""-""
"3
Pin Assignments and
Cautions when using Multi 560 . . . . . 4
Signdhvel
. . . . . . . . . . . . . . ..ll
HOW TO USE
Signal Titing
. . . . . . . . . . . . . . . . .12
How to Install the Multi 560 ...,
. . . 5
How to Remove or Install
Location and Description of
aTilt/Swivel
Stand
. . . . . . . . ...14
User Controls . . ..".
."""
"6"""6
Adjusting Multi 560
. """""-"""".
8
5
Advertisement
