Hitachi AXM89MP3UK Operating Instructions Manual page 6

that is recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart
combination to overturn.
16. WALL OR CEILING MOUNTING - If the appliance is mounted to a wall or ceiling
it should be mounted only as recommended by the manufacturer.
17. DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified
service personnel when:
A. The power-supply cord or plug has been damaged.
B. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
C. The appliance has been exposed to rain.
D. The appliance has been dropped, or the enclosure damaged.
E. The appliance does not appear to operate normally or exhibits a marked
change in performance.
18. SERVICING - The user should not attempt to service the appliance beyond that
described in the user's operating instructions. All other servicing should be
referred to qualified service personnel.
19. OUTDOORANTENNAGROUNDING - If an out
side antenna is connected to the receiver, be
sure that the antenna system is grounded so
as to provide some protection against voltage
surges and built up static charges. Section
810 of the National Electrical Code, ANS/
NFPA No. 70-1984 provides information with
respect to prop er grounding of the mast and
supporting struc ture, grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
20. PROTECTIVE ATTACHMENT PLUG - The appliance is equipped with an attach
ment plug having overload protection. This is a safety feature. See instruction
Manual for replacement or resetting of protective device. If replacement of the
plug is required, be sure the service technician has used a replacement plug
specified by the manufacturer that has the same overload protection as the orig
inal plug (UK option only).
21. Mains plug is used as the disconnect device. It shall remain readily operable and
should not be obstructed during intened use. To be completely disconnected the
apparatus from supply mains, the mains plug of the apparatus shall be discon-
nected from the mains socket outlet completely.
5