Hitachi AXM89MP3UK Operating Instructions Manual page 15

Before setting the timer, make sure the clock is correctly set.
TIMER ON SETTING
Select TUNER or CD mode and select the desired sound source.
For TUNER
1. If you select BAND, press REW/DN
2. The display will show the selected preset station and frequency.
3. Press TIMER to confirm your selection.
" H" Icon and "ON" will appear on the display.
4.
5. The digit of hour segment will flash more than 2 seconds.
6. Press REW/DN
7. Press TIMER again, the digit of minutes segment will flash on the display.
8. Press REW/DN
9. Press TIMER again to store the start time.
10. Repeat steps 6~8 to set the timer off.
11. The display will show TUNER segment.
12. Press TIMER to store the sound source.
13. The volume level will appear on the display.
14. Press REW/DN
15. Press TIMER again to store the timer setting.
For CD
1. Insert a disc into the CD tray.
2. Press TIMER.
3. Repeat steps 4-11 under For tuner for Timer setting.
4. Press REW/DN
5. The volume level will appear on the display.
6. Press REW/DN
7. Press TIMER again to store the timer setting.
8. CD will be played.
TIMER OFF SETTING
1. Press the TIMER.
The " H" icon will disappear.
2.
If you want to change the auto play time, redo the steps above.
OPERATION/SLEEP
1. Press SLEEP, "SLEEP" appear on the display.
2. Keep pressing SLEEP to adjust the sleep time in the order of 90>80>70...10 minutes.
3. To cancel the sleep mode, press SLEEP again.
OPERATION/PRESET EQUALIZER
Press EQ key to select the digital sound performance in the order of PASS,
CLASSIC, ROCK, POP & JAZZ.
OPERATION/TIMER
B
or FF/UP to set the hour.
B F
or FF/UP to set the minutes.
B F
or FF/UP to set the desired sound level.
B F
or FF/UP to set the sound source to CD.
B F
or FF/UP to set the desired sound level.
B F
(FOR REMOTE ONLUY)
14
or FF/UP to select a preset station.
F