Electrical Connection - Hitachi MCB30 Instruction Manual

ELECTRICAL CONNECTION

For your safety please read the following information
Warning:
This appliance must be earthed.
The appliance must be connected to a 240 volts 50 Hz AC supply by means of a three pin socket, suitably
earthed and should be protected by a 13 amp fuse in the plug.
The appliance is supplied with a 13-amp 3-pin mains plug fitted with a 13 amp fuse. Should the fuse require
replacement, it must be replaced with a fuse rated at 13 amp and approved to BS1362
The plug contains a removable fuse cover that must be refitted when the fuse is replaced. In the event of the fuse
cover being lost or damaged, the plug must not be used until a replacement cover has been obtained.
If the mains plug is unsuitable for the socket outlet in your home or is removed for any other reason,
then the fuse should be removed and the cut off plug disposed of safely to prevent the hazard of electric shock.
There is a danger of electric shock if the cut off plug is inserted into any 13 amp socket outlet.
How to wire a 13 amp plug
Important
The wires in the mains lead on this appliance are coloured in accordance with the following code :
Green and Yellow – Earth
Blue – Neutral
Brown – Live
As the colours may not correspond with the markings identifying the terminals in your plug proceed as follows.
The green and yellow wire must be connected to the terminal in the plug, which is marked with the letter E, or
with the earth symbol or coloured green and yellow.
The blue wire must be connected to the terminal marked N.
The brown wire must be connected to the terminal marked L.
3