Connecting The Ac Power Plug; Turning The Power On And Off; Sound Quality; Adjusting The Volume - Hitachi AX-M76 Instruction Manual

Connecting the AC Power Plug

Insert the AC power plug into a wall outlet, and your system is ready to use.
Caution: Be sure to unplug the power plug from the outlet when going out or when the system is
not in use for an extended period of time.

Turning the Power On and Off

When the unit is first connected to the mains, the unit will be in ECO POWER standby mode and the
VFD will not be illuminated.
To bring the unit out of ECO POWER standby mode; press the standby button ( ) on the unit for three
seconds.
To put the unit back into ECO POWER standby mode from normal standby; press the standby button
( ) for three seconds when the clock is displayed. The clock display will disappear and the blue led
will be illuminated. (see "Setting the clock" on page 14").
Caution: Be sure to unplug the system from the wall output when the system is not in use for an
extended period of time.

Sound Quality

Adjusting the Volume

To increase or decrease the volume, rotate the volume control knob (
or press the volume up/down buttons (

Adjusting the super bass

You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the super bass button (
on the VFD. Press the super bass button (

Control the Loudness

This unit has a loudness function, it can automatically increase bass sound effect at low volume
(the higher volume, the smaller bass increase). You only need to press the loudness button
( ) on the remote control to obtain the loudness function, the "LOUD" will display on the
LOUDNESS
VFD.

Preset Equalizer

You can adjust the sound reproduced by pressing the preset equalizer button (
Select from one of the 5 preset equalizer:
POPS

Changing the VFD Darkness

To dim or brighten the VFD display, repeatedly press the dimmer button (
to the desired brightness.
VOL +/-
) on the remote control to get the effect, the "BASS" will display
S-BASS
S-BASS
JAZZ CLASSIC
) on the remote control.
) again to cancel the effect.
ROCK No Display
- 9 -
) on the CD player
- VOLUME +
) repeatedly.
P-EQ
) on the remote control
DIM