Hitachi AX-M68D Operating Instructions Manual page 16

Recalling Station
If a preset button is pressed and released, then that initiates tuning to the station previously stored
under that preset.
If no preset has previously been stored then the following message is displayed for 3 seconds...
Then reverts to the current station display
Scan
Pressing AUTO, scans up the frequencys until a transmission is detected.
Pressing and holding the AUTO button for one second or more scans down the frequencys until a
transmission is detected.
Signal Quality
The bottom line displays a graphical representation of the signal quality of the station
currently being demodulated.
Poor signal quality...
Good signal quality...
This display will be continuously updated so that the user can use it to position the aerial to obtain
the best reception.
Time and Date
The bottom line displays the time and the date in the following format (requires RTS transmission).
FM
Preset 01 Empty
92.6MHz FM
Classic FM
Classic FM
Classic
17:23 06.08.2003
- 15 -
FM