Table of Contents
Advertisement
CD Operation
CD Playing
1. Press the function button (FUNCTION) on the amplifier or CD function button (CD) on the remote
control to select CD function.
2. Press the open/close button
printed side up).
3. Press the open/close button
automatically.
4. Press the play/pause button
5. Press the stop button
Direct Select track
Load a disc, upon finishing reading the disc, you can select tracks by using number buttons (0/10,1-
9,10+) on the remote control and play.
If the song number is less than 10, press the number buttons 1-9.
If the song number is over 10, press the 10+ button and then one of the number
buttons 0/10,1-9. Each press of 10+ increases the tens by 1 eg 10, 20, 30, so for track '22' press
'10+' twice then '2'.
To Skip Search and Play
Press the previous button
previous track.
Press the next button
To Search
Press and hold the search backward button
you intend to start playing.
Program Play
1. Insert a disc and press STOP when it starts playing.
2. Press the PROGRAM button (PRG.).
3. Press the NUMBER button (0/10, 1-9, +10) on the remote control to select the desired track number.
4. Repeat steps 2 and 3 until all required tracks are selected.
5. Press the PLAY/PAUSE button
6. Press the STOP button
Random Play
You can have the selections or CD played in a random order.
Random play begins from the stop position by pressing the random button (RANM) on the remote
control.
to open the disc door and place the disc on the disc tray (with the
to close the disc door, the unit will read the disc and play it
to pause the playing, press the button again, it will be continue to play.
to stop the disc play.
once or more to skip to the beginning of the current track or
once or more to skip forward one or more tracks of the disc.
or search forward button
Auto Tune
FM Search...
to start programme play.
to stop the programme play. Press twice to clear program.
- 16 -
to search for the position that
Hide quick links:
Advertisement
Table of Contents
