Lcd Messages - Compaq DAT AutoLoader Reference Manual

4-12 Compaq DAT AutoLoader Reference Guide

LCD Messages

Front panel LCD messages are provided in list Table 4-1.
LCD Messages - Alphabetical Listing
LCD Message Message
Type
Cassette Stuck In Error
Drive
Cleaning Status
in
Process
Cleaning Error
Failed
CleanReq
CleanReq Error
Drv HW Error
Error
04xxxxxx
Eject Info
Prevent
Ejecting Info
Magazine
Table 4-1
Meaning
A cassette is stuck in the drive.
A cleaning cassette has been loaded into the drive
mechanism and is cleaning the heads. The cleaning cassette
will be automatically returned to the magazine when the
cleaning cycle is complete.
The cleaning cassette is used up. Replace the cleaning
cassette and discard the old one.
It is time to clean the heads on the drive or a high error rate
has been detected reading or writing. Move the cleaning
cassette from the magazine to the drive (if necessary, load a
cleaning cassette into the magazine). The cleaning cycle will
automatically start once the cleaning cassette is loaded in the
drive. See "Cleaning in Process."
This is an embedded-drive hardware error. In some cases the
SCSI error code generated will be displayed on the 3
M4sxxsxx where the xx's represent the additional sense code
and qualifier.
This is displayed when the SCSI command "PREVENT MEDIA
REMOVAL" has been set, and the Eject button has been
pressed. Th SCSI command prevents the cassette or
magazine from ejecting.
This is displayed after the Eject button is pressed and the
magazine is being ejected.
rd
line as
continued