Loading The Magazine Into The Autoloader; Removing The Cassettes From The Magazine - Compaq DAT AutoLoader Reference Manual

4-6 Compaq DAT AutoLoader Reference Guide
Loading the Magazine into the
AutoLoader
Removing the Cassettes from
the Magazine
3. For an eight-cassette configuration, insert a cassette in position 8.
CAUTION: The cassettes must be loaded in the order they were originally
placed during backup.
Insert the magazine into the front opening on the AutoLoader in the direction
of the arrow. The AutoLoader pulls the magazine in the rest of the way.
Figure 4-8. Loading the magazine into the DAT AutoLoader
The AutoLoader does a rotation check of the cassettes. If there is an incorrect
cassette configuration the AutoLoader ejects the magazine. See "Loading the
Magazine with Cassettes" for the correct configurations.
NOTE: Compaq recommends storing the magazine with the cassettes loaded to ensure
they are in the correct order.
1. Hold down the magazine stopper – in the direction of the arrow while
removing cassettes.