The Mouse - VTech Vapor User Manual

To select and use the screen effects:
1. Tap this icon to display the Screen Effect menu.
2. Tap the effect you want to use and tap Enter. Every time you tap the screen, this
effect will make a sound and display an image.
3. To deactivate the screen effect, tap Esc.
Smart Card Icon
Tap this icon to play the Trivia Smart Card or to list all saved data in a Memory
Smart Card (see Smart Cards for details).
Smart Card slot when this icon is tapped, Vapor will show an error message.
Note: Smart Cards are sold separately.

The Mouse

Once the mouse is installed, you may move the cursor around the screen freely. The
mouse has a roller ball in it; therefore, it should be used on a clean, flat surface.
A mouse pad is ideal, but you may use a piece of paper, a notebook, or a magazine.
This mouse is compatible with VTech products only.
Connecting the Mouse
1. Make sure Vapor is turned OFF.
2. Locate the mouse jack on the back of Vapor (same shape as a phone jack).
3. Plug the mouse cord into Vapor's mouse jack.
4. Turn Vapor ON to check that the mouse is working.
Using the Mouse
1. Move the mouse in the direction you want the cursor to move.
2. Click the left mouse button to make a selection.
3. Click the right mouse button to exit the current screen and go back to the previous
screen.
Cleaning the Mouse
1. Use a screwdriver to open the cover on the bottom of the
mouse (twist in the direction of the arrows).
2. Take the ball out of the mouse and use a dry cloth to clean
the contents of the mouse and the ball.
3. Place the ball back in the mouse, place the cover back
on the mouse, and use the screwdriver to twist the cover
closed.
If there is no card in the
12