Powering Vapor On And Off; Resetting Vapor; Setting The Date And Time - VTech Vapor User Manual

User manual
Table of Contents

Advertisement

Important: While replacing the backup battery, the 3 "AAA" batteries must be kept in Vapor
or Vapor must be connected to the AC adaptor while the adaptor is plugged
in. If not, you will lose all saved information.

Powering Vapor ON and OFF

To turn the handheld ON, press and hold the Power button for 1 second or longer.
To turn the handheld OFF, press the Power button again.

Resetting Vapor

If Vapor stops working or doesn't turn on:
1. Check your batteries to make sure they are fresh and installed properly.
2. Press the Reset button and then press the Power button again.
3. When prompted, "Delete all data? (
data loss.
If you are still having problems, we encourage you to contact our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada with any
problems and/or suggestions that you have. A service representative will be happy
to assist you.

Setting the Date and Time

To set the date and time:
1. Press the Organizer button or tap Organizer in the main menu, and then tap Time.
2. Tap icon
in the center.
3. Tap icon
or
4. Tap icon
to change from AM to PM when you are in the 12-hour format.
5. Tap icon
or
6. When you are finished setting the date and time, tap Enter.
to set the hours and minutes.
to set the date.
/
)," select
3
to restart Vapor without

Advertisement

Table of Contents
loading

Table of Contents