Feature Menu - Hitachi L42VK06U Instructions For Use Manual

AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain fi xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press " " or " " button to select AVL. Press " " or
" " button to set the AVL as On or Off.
Spdif Out
Press " " or " "" button to select Spdif Out . Press "
" or " " button to set the Spdif Out as On or Off .
Effect
If you are watching a mono broadcast, set Effect on to
obtain a better sound effect which will be more stereo-
like. If the current sound system is stereo, switching
this effect on will give a more spatial effect.
Press " " or " " button to select Effect. Press " "
or " " button to set as On or Off .
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. " Stored..." will be
displayed on the screen.

Feature Menu

Sleep Timer
Press " " or " " button to select Sleep Timer . Use
" " or " " button to set the Sleep Timer.
The timer can be programmed between Off and 2
hours (120 minutes) in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Child Lock
Press " " or " " button to select Child Lock.
Use " " or " " button to set the Child Lock On or Off.
When On is selected, the TV can only be controlled
by the remote control. In this case the control panel
buttons will not work, except for the Standby/On
button. When Child Lock is activated you are able to
switch the TV into Standby mode with the Standby/
On button. To switch the TV on again, you need the
remote control. In this case the control panel buttons
(except for the STANDBY button) will not work. Hence,
if one of those buttons is pressed, Child Lock Is On
will be displayed on the screen when the menu screen
is not visible.
Language
Press " " or " " button to select Language. Use "
" or " " button to select the Language.
Default Zoom
While zoom mode is set as AUTO , the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to adopt.
Press " " or " " button to select Default Zoom. You
can set Default Zoom to 16:9, 4:3, Panoramic or
14:9 by pressing " " or " " button.
Note : Default Zoom feature will not be available while in
Digital Tv mode.
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
By pressing "
Background. Press " " or " " button to set Blue
Background as On or Off.
Menu Background
Press " " or " " button to select Menu Background.
You can set menu background level by pressing
" " or " " button.
Power Save Mode
Use " " or " " button to select Power Save Mode.
Press " " or " " button to set Power Save Mode as
On or Off.
See the section, "Environmental Information" in
this manual for further information on Power Save
Mode.
Note : Backlight function will be invisible if Power Save
Mode is set to on.
Backlight
This setting controls the backlight level. Select
B a c k l i g h t b y p r e s s i n g "
Press" " or " " button to set Backlight to Auto,
Medium, Maximum or Minimum.
Menu Timeout
To set a specifi c display timeout for menu screens,
set a value for this option.
Press " " or " " button to select Menu Timeout . Use
" " or " " button to change menu timeout to 15 sec,
30 sec or 60 sec.
English - 25 -
" or " " button, select Blue
" o r " " b u t t o n .