Media Browser Menu; Playing .Mp3 Files; Playing .Jpg Files; Pc Mode Menu System - Hitachi L42VK06U Instructions For Use Manual

In source menu, highlight a source by pressing "
" or " " button and switch to that mode by
pressing " " button. Source options are; TV, DTV,
EXT-1, EXT-2, EXT-2S, SIDE AV, S-VIDEO, HDMI-1,
HDMI-2, HDMI-3, YPbPr or PC-VGA.
With the OK button you can set or remove a mark. When a
mark is removed; this source does not appear in the OSD
when you press the SOURCE button of the remote control.
Note: Once you have connected optional equipment systems
to your TV, you should select the required input to view
pictures from that source.

Media Browser Menu

If you plug a valid USB fl ash drive to the TV set, the
following menu will be displayed on the screen if
the plugged USB unit is compatible with this TV set.
Contents of this screen will change in accordance with
the fi les stored on your USB drive.
• You can display pictures (.jpg fi les) or play music
(.mp3 fi les) through the Media Browser.
Note:
• See the section, "Using Digital Multimedia Connectors",
before plugging a device to the TV set.
• If you enter the Media Browser menu without plugging a
USB device to the TV, "No USB Device" message will be
displayed on the menu screen.
Note: Unknown fi le formats will be marked with a question
mark.
You can use the following remote control buttons to
browse between fi les stored on your USB drive:
Up / Down Explores the fi les.
OK Views / plays a selection /
Menu Back.
Red Filters JPG fi les.
GREEN Filters MP3 fi les.
" " / " " Select next or previous
fi le.
enter folder.
English - 28 -

Playing .mp3 Files

If you play a mp3 fi le, the following screen will be
displayed during the playback:
You can use cursor buttons on the remote control for
available functions.

Playing .jpg Files

If you play a jpg fi le, the following screen will be
displayed while viewing:
You can use cursor buttons on the remote control for
available functions.

PC Mode Menu System

See "Connecting the LCD TV to a PC" section for
connecting a PC to the TV set.
For switching to PC source, press "SOURCE" button
on your remote control and select PC input. You can
also use "Source" menu to switch to PC mode.
Note that PC mode menu settings are available only while
the TV is in PC source.

PC Position Menu

S e l e c t t h e f i r s t i c o n b y p r e s s i n g "
" " button. PC Position menu appears on the
screen:
" o r