Setup; Confi Guration - Hitachi L42VK06U Instructions For Use Manual

Setup

The adjustments in this menu are given as the
following:
Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK to
view this menu. Press the RETURN button on the
remote control to exit.
Active Channels
You can select broadcasts to be listed in the channel
list. To display specific types of broadcast, you should
use active channel list setting. Select Active channel
list by using " " or " " button. Press OK button to
continue.
Scan Encrypted
Scan Encrypted Channel feature will always be YES
after performing first time installation. When this
setting is on, search process will locate the encrypted
channels as well. If it is set as NO manually, encrypted
channels will not be located while in automatic search
or manual search. Use " " or " " button to select
Scan Encrypted and then press " " or " " button to
set this setting as Yes or No.
Output Settings
You can use this option to confi gure output settings.
AC3 Audio
Highlight the AC3 Audio item by pressing " " or
" " buttons. Use the " " or " " buttons to set the
AC3 Audio as On or Off.
If the channel that you are watching supports AC3
Audio, turn this setting on.
SPDIF Delay
You can use this setting when there is an
synchronization problem in the received broadcast.
Press " " or " " button to change the delay or use
numeric buttons to enter SPDIF Audio delay manually.
When fi nished, press GREEN button to apply.
SPDIF Audio
Use this setting to define digital audio out signal
type. Use " " or " " buttons to set SPDIF Audio
as Compressed or PCM. If your selected channel
includes Compressed sound stream, you should
connect your TV to external equipment by using
spdif out of your TV for enabling the sound output.
If you have no external sound equipment, please
select Digital Audio Out as "PCM" by using " " or "
" button.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most up to date
information, use this setting. Please ensure that the TV
is set to standby mode. The TV automatically
powers up at 3.00 A.M. each day and searches for
any new information which may be broadcast and
will download this to your receiver automatically. This
operation will normally take approximately 30 minutes.
If you have an important recording to be carried out at
3.00 A.M. and you do not want to interrupt it, disable
auto OAD search by performing the following:
• Press MENU button and using the " " or " " buttons
to choose Setup and press OK button.
• Highlight Confi guration menu with " " or " " keys
and press OK.
• Using the " " or " " button change "Automatic
scanning" from Enabled to Disabled.
• Highlight "Scan for upgrade" menu with " " or "
"keys and pres OK to commence upgrade.
English - 20 -