Lightolier QVS2GPFOB232 Installation

Efficiency 58.4%.
Broadcast 4: Broadcast control requires no programming of
the iGEN ballasts. Dimming message are sent with a global
address from the master Alter Smart Vision luminaire
to up to 3 slaves luminaire with an iGEN address able
ballast (DA). Each ballast receives the same command and
responds unifomity.
Swing down microperforated lamp shield for easy
relamping and maintenance.
Lamp shield specially cut to accomodate Smart
Vision sensor.
Alter soft white film on inside of mesh conceals lamp
image providing balance between reflected and
direct light.
Fully recessed luminaire and lamp compartment.
95% Reflective Alter soft white paint finish.
Specular interior reflector.
One piece body for easy installation.
Easy access to ballast through lamp
compartment.
Fits standard T-Grid ceilings.
Optional acrylic drop-down visual element.

MOUNTING METHODS/FEATURES

Ceiling compatibility
Suited to standard exposed T-grid ceilings
Swing down optical system for
easy relamping and maintenance
Microperforated mesh lamp shields
L30-80
QVS2GPFOB232
ALTER SMARTVISION
2' X 4' RECESSED DIRECT/INDIRECT FLUORESCENT
2 LAMP , T8, 5 1/2" DEEP
MICROPERFORATED MESH LAMP SHIELD
STATIC
Suited to standard exposed Slot T-grid ceilings
integrated motion and light sensor with
optional dimming infrared remote control

DIMENSIONS

FIXTURE TYPE
JOB INFORMATION:
VOLTS