Attachments And Accessories; Care And Cleaning - KitchenAid KSM7581BZ Use & Care Manual

Attachments and Accessories

General Information
KitchenAid Attachments are designed to assure long life. The Attachment Power Shaft
®
and Hub Socket are of a square design, to eliminate any possibility of slipping during the
transmission of power to the attachment. The hub and shaft housings are tapered to assure
a snug fit, even after prolonged use and wear. KitchenAid
power unit to operate them; the power unit is built-in.
Attachment Housing
Attachment Shaft Housing

Care and Cleaning

The Stainless Steel Bowl, Coated Metal
Flat Beater, Stainless Steel Wire Whip, and
Coated Metal Spiral Dough Hook may be
washed in an automatic dishwasher. Or,
clean them thoroughly in hot sudsy water
and rinse completely before drying. Do not
store beaters on shaft.
Accessories Burnished Metal
Burnished metal
beater and dough
hook should be
hand washed. May
discolor if used in
dishwasher.
Not applicable
Not applicable
10
Attachment Power Shaft
Pin
Coated Metal
White or silver
coated metal beaters
are dishwasher-safe.
(Available on most
models)
Not applicable
Not applicable
Attachments require no extra
®
Hinged Hub Cover
Attachment
Hub Socket
Attachment
Knob
Notch
NOTE: Always be sure to unplug Stand
Mixer before cleaning. Wipe Stand Mixer
with a soft, damp cloth. Do not use
household/commercial cleaners. Do not
immerse in water. Wipe off Beater Shaft
frequently, removing any residue that may
accumulate.
Stainless Steel
Not applicable
All wire whips are stainless
steel and should be hand
washed only.
All metal bowls are stainless
steel and dishwasher-safe.
(Available on all bowl-lift
models)