Nikon COOLPIX S5200 Reference Manual page 251

Display
The memory card has
been removed. Wi-Fi is
now disabled.
No access
Could not connect
Wi-Fi connection
terminated.
Lens error
Communications error
System error
Cause/Solution
The memory card in the camera was removed while the
camera and the smart device were wirelessly connected.
The wireless connection has been aborted. Insert the
memory card and establish a connection again.
Could not receive the communication signal from the
smart device. Set Wi-Fi network to On in Wi-Fi options
in the setup menu, and wirelessly connect the camera
and smart device again.
Failed to establish the connection while receiving the
communication signals from the smart device. Select a
different channel in Channel in Wi-Fi options in the
setup menu and establish the wireless connection again.
An HDMI, USB or audio/video cable was connected to
the camera while the camera and smart device were
wirelessly connected, the battery level became low, or
the connection was aborted due to poor connectivity.
Disconnect the cable and establish the wireless
connection again.
Lens error.
Turn camera off and then on again. If error persists,
contact retailer or Nikon-authorized service
representative.
Error occurred during communication with printer.
Turn camera off and reconnect USB cable.
Error has occurred in camera's internal circuitry.
Turn camera off, remove and reinsert battery, and turn
camera on. If error persists, contact retailer or Nikon-
authorized service representative.
A
109
109,
E104
109,
E104
109,
E104
24
E30
14, 25
E119