D-Link DNS-726-4 - Network Video Recorder Standalone DVR Product Manual page 74

Secton  - Configuraton
Set.Connections.to.the.Units
Step 1: Click the Site.Setup button.
Step 2: Input the unit name.
Step 3: Input the IP address.
Step 4: Modify the port if necessary.
Step 5: Input the user name.
Step 6: Input the password.
Step 7: Check the Save.Password/.
Auto.Login option.
Step 8: Click the Test.Server button to
test the connection between the local
application and the remote unit.
Step 8: Click the Add.button to add this
unit into your remote server list.
Step 9: Click the.OK button.
Site Setup
Set.Groups.for.Cameras
Step 1: Click the Group tab.
Step 2: Log in to all the servers that contain the
camera(s) you would like to put into group(s).
Step 3: Click the Insert button to create a new group.
Step 4: Name this group.
Step 5: Highlight the camera(s) that you would like
to add into this group and then click the <- button.
Step 6: Repeat step 4 to establish the group.
Step 7: Repeat step 1 through 6
to establish other groups.
Step 8: Click the.OK button.
D-Lnk DNS-722-4/DNS-726-4 User Manual 70