Backup And Restore - D-Link DNS-726-4 - Network Video Recorder Standalone DVR Product Manual

Secton  - Configuraton
Users can save the NVR configuration to a file and restore it when necessary. Ocassionally, restarting the NVR can
keep the system running smoothly. Reset the NVR to restore all configurations to factory default.
Save
All the configurations can be saved as a file to the
Configuration: specified location. Click the Save.Configuration.
button to save the file.
Load
User can restore the configuration file after reset
Configuration
to factory default file.
File: Click the Browse button to select the
configuration file and restore it by clicking the
Restore.Configuration.from.File button.
Restart:
If the NVR is malfunctioning or crashes
unexpectedly, click the Restart button on the
NVR. Restarting the NVR will take about one
and a half minutes.
Reset to
This will reset all configurations to factory
Default: default. User can select to preserve the IP or
DDNS, thus the remote connection will remain
after reset.
D-Lnk DNS-722-4/DNS-726-4 User Manual

Backup and Restore

4