Rear Panel (Connections) - D-Link DNS-726-4 - Network Video Recorder Standalone DVR Product Manual

Secton  - Product Overvew
Power.Receptacle:
The supplied power adapter connects here.
Gigabit.Ethernet.Port:
The Gigabit Ethernet port connects the NVR to a network.
Drive.Eject.Lever:
Use these levers to eject the hard drives. The front panel
must be removed before ejecting the drives. Make sure to
reset the ejector before installing the new hard drive.
Reset.Button:
A pinhole button located beside the Ethernet socket is used
to reset the system or restore the factory default settings.
To reset, simply press and hold the button until the power
LED flashes.
D-Lnk DNS-722-4/DNS-726-4 User Manual

Rear Panel (Connections)

Drive.Eject.Lever
Cable.Holder
Power.Receptacle
Reset.Button
Fan
Drive.Eject.Lever
Security.Cable.Slot
USB.Connector
Gigabit.Ethernet.Port
USB.Connector:
A UPS can be used as an emergency power supply for the
NVR. The UPS can use the USB interface to notify the NVR to
perform a proper shutdown before battery power runs out.
Security.Cable.Slot:
An external lock can be affixed to this slot to prevent theft.
Fan:
The NVR will adjust the system temperature automatically
by turning the fan on/off.
Cable.Holder:
Holds the power cable to ensure a safe operating
environment.
Note: After resetting the unit, you will still be able to access the recorded data on
your hard drives.
0