Call Tone Settings - Cobra MICROTALK CXR900C Owner's Manual

Mode Functions
Operation
Intro Operation Customer
VibrAlert ® and Call Alert
Assistance
Your microTALK ® radio can alert you to incoming signals by
sounding an audible call tone, by vibrating silently or both.
To change call settings:
Mode Button
1. Press the Mode button
until the Call Setting icon
Secondary Icons
flashes on the display.
The current setting ("01"
vibrate + ring, "02" vibrate
Channel Button
only or "03" ring only)
is displayed.
2. Press the Channel Up or
Notice
Channel Down button to
change the call setting.
3. Choose one of the following:
a. Press the Mode button
to enter the new setting
and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.

10 Call Tone Settings

You can choose from 10 different call tone
Mode Button
settings to transmit a unique call alert.
To change a call tone setting:
1. Press the Mode button until the
letter "C" and the current call tone number
(01 through 10) is displayed.
Call Tone Setting
2. Press the Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode button to enter the new
Channel Button
setting and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
24 English
Warranty
VibrAlert + Ring
®
VibrAlert Only
®
Ring Only
Introduction
Roger Beep Confirmation Tone
•
Roger Beep is an audible tone that your listener will hear when
you release the Talk button. This alerts the other party that you
are finished talking and it is OK for them to speak.
Mode Button
Secondary Icons
Roger Beep On
Channel Button
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound
beeps each time you press a button or change a setting.
Mode Button
Keystroke Tones On
Channel Button
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
To turn roger beep on or off:
1. Press the Mode button until the
Roger Beep icon flashes on the display.
The current on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep on or off.
3. Choose one of the following:
Notice
a. Press the Mode button to enter
the new setting and proceed to other
functions.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
To change keystroke tones:
1. Press the Mode button until the Keystroke
Tones icon flashes on the display. The
current on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn keystroke tones on or off.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and return to Standby mode.
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
Nothing Comes Close to a Cobra
Warranty
•
•
® 25