Call Tone Settings - Cobra microTALK LI5600-2DXVP Owner's Manual

10289_LI5600DX_PH2 8/10/07 11:28 AM
Main Icons
Mode Functions and
General Specifications
Operation
Intro Operation Customer Warranty

10 Call Tone Settings

Assistance
You can choose from 10 different call tone settings to transmit
a unique call alert.
To change a call tone setting:
Mode Button
1. Press the Mode button until the
letter "C" and the current call tone number
Secondary Icons
(01 through 10) is displayed.
2. Press the Channel Up or Channel Down
Call Tone Setting
button to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode button to enter the new
Notice
setting and proceed to other functions.
Channel Buttons
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
Roger Beep Confirmation Tone
Roger Beep is an audible tone that your listener will hear when
you release the Talk button. This alerts the other party that you
are finished talking and it is OK for them to speak.
To turn roger beep on or off:
Mode Button
1. Press the Mode button until the
Roger Beep icon flashes on the display.
The current on or off setting is displayed.
2. Press the Channel Up or Channel Down
Roger Beep On
button to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode button to enter
the new setting and proceed to other
functions.
Channel Buttons
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
24
Page 24
Main Icons Main Icons
Introduction Introduction Operation Operation
Intro Intro Operation Operation
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound
beeps each time you press a button or change a setting.
To change keystroke tones:
Mode Button
1. Press the Mode button until the Keystroke
Tones icon flashes on the display. The
Secondary Icons Secondary Icons
current on or off setting is displayed.
2. Press the Channel Up or Channel Down
Keystroke Tones On
button to turn keystroke tones on or off.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and return to Standby mode.
Channel Buttons
b. Press the Lock/Enter button to enter the
new setting and return to Standby mode.
•
Customer Assistance Warranty Customer Assistance Warranty
Customer Customer Warranty Warranty
Assistance Assistance
•
Notice Notice
Nothing Comes Close to a Cobra ® 25