Cobra MICROTALK CXR900C Owner's Manual page 11

Mode Functions
Operation
Intro Operation Customer
Intro Operation To recall a stored memory channel location:
Mode Button
Main Icons
Assistance
1. Press the Mode button until the Memory icon
and the memory location number flash on the
display.
2. Press the Channel Up or Channel Down
Secondary Icons
button to select a memory location
Memory Icon
Secondary Icons
Intro Operation
(0 through 9).
Channel Button
Notice
Secondary Icons
3. Press the Talk button to return to Standby
Notice
mode on the selected memory location.
Notice
While recalling a stored memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to Standby
mode on the channel/privacy code displayed
before you entered mode functions.
16 English
Warranty
Customer Warranty
Assistance
Customer Warranty
Assistance
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
A memory location can be reprogrammed
at any time it is displayed and flashing.
Press the Lock/Enter button to begin.
Operation
Introduction
Intro Operation
To de-program a memory location:
Intro Operation Customer
Mode Button
Assistance
1. Press the Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
Secondary Icons button to select the memory location
Memory Icon
Secondary Icons
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
Channel Button
Notice
3. Press the Lock/Enter button. The channel
Notice
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select Channel 0.
5. Choose one of the following:
Lock/Enter Button
a. Press the Lock/Enter button to enter
the channel/privacy code in the selected
memory location and return to the
beginning of memory location options.
b. Press the Mode button to
Channel 0
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to Standby
mode on the channel/privacy code displayed
before you entered mode functions.
Customer Assistance Warranty
Customer Warranty
Warranty
Assistance
Nothing Comes Close to a Cobra ® 17