Channel Scan - Cobra MICROTALK CXR900C Owner's Manual

Main Icons
Mode Functions
Operation
Intro Operation Customer

Channel Scan

Assistance
Your microTALK ® radio can automatically scan channels.
Intro Operation
To scan channels:
Mode Button
1. Press the Mode button until the
Scan icon and the channel numbers
flash on the display.
Secondary Icons
Secondary Icons
2. Press the Channel Up or Channel Down
button to begin scanning channels.
Scanning Channels
Notice
The Scan icon will continue to be displayed
Notice
when scan is on. Your radio will continue to
Channel Button
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for 10 seconds.
While setting channel scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to Standby mode on
the channel or channel/privacy code displayed
before you entered mode functions.
18 English
Warranty
Customer Warranty
Assistance
The radio ignores specific privacy
codes while scanning channels.
Introduction
During channel scan (while receiving an incoming transmission),
•
you can choose from the following:
a. Press and hold the Talk button to communicate on
that channel. Your radio will remain on that channel
and return to Standby mode.
b. Press the Channel Up or Channel Down button to
Secondary Icons
resume scanning channels.
If you press the Talk button while scanning, but more than
10 seconds after receiving a transmission, you will transmit
on the channel on which you last received a transmission.
This will return the radio to Standby mode.
If you do not press any button within 10 seconds after
receiving a scanned transmission, your radio will automatically
resume scanning channels.
During channel scan (while not receiving a transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on the
channel or channel/privacy code that was displayed before
you entered mode functions or the channel on which, during
scanning, you last received a transmission. This will then
return the radio to Standby mode.
b. Press the Mode button to proceed to set privacy code scan
on the channel that was either displayed before you entered
mode functions or on which, during channel scanning, you
last received a transmission (see page 20 for further details).
c. Press the Lock/Enter button to return to Standby mode
on the channel/privacy code that was displayed before you
entered mode functions or the channel on which, during
scanning, you last received a transmission.
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
Notice
Nothing Comes Close to a Cobra
Warranty
® 19