Cobra MICROTALK CXR900C Owner's Manual page 9

Mode Functions
Operation
Intro Operation Customer
NOAA* All Hazards Radio Channels
Assistance
You can use your microTALK
Radio channels transmitting in your area.
To listen to All Hazards Radio channels:
Mode Button
1. Press the Mode button until the WX (All
Hazards Radio) icon, the currently selected All
Secondary Icons
Hazards Radio channel, and signal strength
are displayed.
2. Use the Channel Up or Channel Down button
Hazards Radio Icon
to change All Hazards Radio channels.
3. WX (All Hazards Radio) icon will continue to
be displayed when All Hazards Radio is on.
Notice
Choose one of the following:
a. Press the Mode button to proceed
Channel Button
to other functions.
b. Press the Lock/Enter button to exit
All Hazards Radio channels mode
and return to Standby mode.
*National Oceanographic and Atmospheric Administration
12 English
Warranty
® radio to listen to NOAA All Hazards
Introduction
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
Mode Button
Secondary Icons
Main Icons
VOX Icon
Channel Button
Intro
Secondary Icons
VOX Sensitivity Level
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
® radio can be used "hands-free,"
To turn VOX mode on or off:
1. Press the Mode button until the VOX icon
flashes on the display. The current on or
off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn VOX on or off.
3. Choose one of the following:
Notice
a. Press the Mode button to enter the
selected on or off setting and proceed
to other functions.
Operation b. Press the Lock/Enter button to enter Customer Warranty
Assistance
the selected on or off setting and return
to Standby mode.
To set VOX sensitivity:
1. Press the Mode button until the VOX icon
flashes and the current sensitivity level
is displayed.
The current sensitivity level is displayed
with letters "LE" and a Number 01
through 05, with Number 05 being the
Notice
most sensitive level and Number 01
being the least sensitive level.
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter
the selected setting and proceed to
other functions.
b. Press the Lock/Enter button to
enter the selected setting and return
to Standby mode.
Nothing Comes Close to a Cobra
Warranty
•
® 13