Programmed Playback - Emerson ES50 Owner's Manual

Programmed Playback

You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is
playing press the STOP
programming steps below.
1.) Press the FUNCTION button on the remote control or CD button on top panel to
select CD mode. Insert your disc in the player, close the door, and wait until
the total track number appears in the display.
2.) Press the MEMORY button once. The MEMORY Indicator flashes and program
memory "P-01", Track "01" appears in the display.
3.) Use the or
(Example: Track 08).
4.) When track number "08" appears in the display, press the MEMORY button
once again to enter the track "08" in program memory number "01". The track
number returns to "00" and the program memory advances to "P-02" indicating
that you may now select a track to be entered in program memory number
"02".
ES50_ib071403.p65
button to stop playback before you begin the
buttons to select the first track to be programmed.
19
19 14/7/2003, 11:40