Emerson ES50 Owner's Manual page 17

6.) Press the PLAY/PAUSE
remote control to begin playback on track 1. The display will show the elapsed
playing time of each track as it plays.
7.) Adjust the VOLUME and EQ controls as desired.
8.) When the last track has played the player stops automatically and the display
again shows the total playing time and tracks on the disc. You may also stop
playback at any time by pressing the STOP
main unit or on the remote control.
9.) When you are finished listening press the OPEN/CLOSE
CD door and remove the disc.
10.)Press the POWER button to return the system to the Standby (Power Off)
mode.
Pause Control
To pause momentarily during CD playback press the PLAY/PAUSE
the front panel of the main unit or the remote control again. The sound stops and
the elapsed time display flashes but the disc continues to spin. Press the PLAY/
PAUSE button once more to cancel Pause mode and resume playback. The
elapsed time display stops flashing.
ES50_ib071403.p65
button on the top panel of the main unit or on the
16
16
button on the top panel of the
button to open the
button on
14/7/2003, 11:40