Table of Contents
Advertisement
the receiver has been correctly set up for the TV set connected, a widescreen programme will always
be displayed correctly on a widescreen set, and a standard format programme will correctly fill the
screen of a standard format TV.
With a widescreen TV set displaying a standard format programme the WIDE key switches between
displaying the picture with black bars down the sides, and enlarging the picture so that it fills the whole
width of the screen but the top and bottom are cropped off.With a standard format TV displaying a
widescreen programme, the WIDE key switches between displaying the picture with black bars at the
top and bottom of the screen, and filling the whole height of the screen but cropping the sides off
according to instructions broadcast with the programme (called 'pan and scan').The effect of the WIDE
key on the picture display is cancelled by pressing WIDE again.
NOTE:
Sometimes the TV will automatically try and compensate for an incorrect screen format, in this
instance set the tv to the correct format whilst viewing the programme.
8. TROUBLE SHOOTING GUIDE
Problem
The Led indicator
does not glow
No picture or sound
The settings you have made
in the menus have not been
changed.
The remote control is not
working.
Password forgotten.
Record does not start.
No PIP video.
Possible Reason
Mains cable is
not connected
No signal or weak signal.
The digital set-top box was
unplugged without first
going to standby.
The digital set-top box is in
Stand by.
Remote control is
incorrectly aimed.
Battery exhausted.
No or weak Aerial 2 input
Signal.
No or weak Aerial 2 input
Signal.
PIP Channel is radio or
teletext based.
28
What to do
Check if the main cable is not
plugged into the power socket.
Check the Aerial and scart
connections
Before unplugging your digital set-
top box, make sure it is in standby
Press the standby key.
Check if anything is obstructing the
front panel .
Change the batteries
Take contact with the nearest
service center.
Check Aerial 2 input connection.
Check Aerial 2 input connection.
Use PIP+ / PIP- to choose a valid
TV channel.
Advertisement
Table of Contents
