(Timer); How To Clear A Programmed Recording (Timer) - Hitachi VTMX910EUK Operating Instructions Manual

Note: If any of the TIMER blocks are in use, '
on the video recorder display.
* While a programmed recording is being made, you cannot
operate your video recorder manually. If you want to cancel
the programmed recording, press
* If you reach the end of the cassette during a recording,
the video recorder will automatically eject the cassette.
* If you have put in a cassette that cannot be recorded on,
the cassette will be ejected. 'PROTECTED CASSETTE'
will briefly appear on the TV screen.
* If the video recorder is switched on a few minutes before
a programmed recording is to start, 'SWITCH TO
STANDBY- TIMER RECORDING' will flash on the TV
screen.
* If you forget to put a cassette in the machine, 'NO
CASSETTE' will appear on the TV screen. '
the video recorder display.
* If 'ALL TIMERS OCCUPIED' appears on the TV screen
when you press , you have used up all the available
TIMER
TIMER blocks. If you want to clear or check a programmed
recording (TIMER block), select it with
* If 'DATA ERROR' briefly appears on the screen, this
means that the TIMER information has not been transferred.
Please check date, start time and end time of the
programmed recording
* Programme numbers 'E1' and 'E2' are for recordings from
other sources (through scart socket
20
' will light up
k
.
STANDBY m
' will flash In
k
or .
;P+ P- =
or ).
AV1 EXT1 AV2 EXT2
How to check or change a programmed
recording (TIMER)
1
Switch on the TV set and select the programme number
for the video recorder.
2
Press on the remote control twice.
TIMER
3
Select the programmed recording (TIMER) you want to
check or change with
4
Press .
TIMER
5
Select the entry field with
6
Change any information with
number buttons.
0-9
7
Confirm with .
OK
8
Make sure that the cassette you have put in can be
recorded on. Switch off with
Note: The programmed recording will only function when
the video recorder is switched off with
How to clear a programmed recording

(TIMER)

1
Switch on the TV set and select the programme number
for the video recorder.
2
Press on the remote control twice.
TIMER
3
Select the programmed recording (TIMER) you want to
clear with or
P- = ;P+
4
Press .
CLEAR (CL)
The programmed recording (TIMER) has now been
deleted.
5
To end, press .
MENU
or .
P- = ;P+
or .
Q P
or or with the
P- = ;P+
.
STANDBY m
STANDBY m .
.