Searching For Tape Position Without The Picture (Wind And Rewind); Easy View; Tape Finder; Automatic Search For A Tape Position (Index Search) - Hitachi VTMX905EUK Operating Instructions Manual

Searching for tape position without the
picture (wind and rewind)
1
Stop the tape with
h
2
Press H (reverse) or
This will, for example, appear in the display.
3
To stop a certain place on the tape, press

Easy View

With this function you can switch to picture search during
wind and rewind.
1
If you hold (rewind) or
H
rewind, you will switch to picture search.
2
When you release the button, the video recorder will
automatically switch back to rewind or wind.

Tape Finder

Automatic search for a tape position
(index search)
At the start of each recording, the video recorder will write an
index code on the tape.
1
Press and then
INDEX E
code mark or
INDEX E
code mark.
This will, for example, appear in the display for the next
index code.
2
When the video recorder finds the code mark, it will
automatically switch to play.
.
I (forward).
0:30:
21
.
h
(wind) during wind or
I
button to select the next
I
and then for the previous
H
0:30:
02
Automatic search for a blank space on the
tape
You can search for a space on the tape (at least 1 minute of
blank tape) for a new recording, for example, after an existing
recording on the tape.
1
Press . Then press
INDEX E
This will, for example, appear in the display.
2
When the video recorder find a blank space, it will
automatically switch to 'pause'.
Note: If no empty space has been found when the end of the
tape is reached, the cassette will be ejected.

Picture interference

If the picture quality is poor when you play a cassette, please
follow these instructions.

Tracking during playback

1
While a cassette is playing, hold
picture quality is at its best.
'TRAC' (tracking) will appear on the display.
2
Wait a few seconds, until 'TRAC' disappears from the
display. These picture settings will not change until you
eject the cassette.

Tracking during still picture

If the still picture vibrates vertically, you can improve the still
picture as follows:
1
During still picture, hold
quality is at its best.
'JITT' will appear in the display.
2
When you release the button, 'JITT' will disappear. The
video recorder will store these settings automatically.
Note: Please note, however, that interference may still
occur with poor quality cassettes.
.
h
0:00:
00
or until the
P- = ;P+
or until the picture
;P+ P- =
11