Connecting Ethernet Devices - Cisco 806 Installation Manual

Installing Your Router

Connecting Ethernet Devices

Table 2-1 Connecting Ethernet Devices
Network Device
Connected to Router
Hub with equivalent to
router TO HUB/TO PC
button
Hub with equivalent to
router TO HUB/TO PC
button
Hub without equivalent to
router TO HUB/TO PC
button
Server, PC, or workstation –
1. Hub vendors use different names for the button controlling the cable selections. This table uses the Cisco 1528 Micro Hub
10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for your particular hub. Refer to
your hub documentation for details.
2. Cisco provides a yellow straight-through cable. You must provide additional straight-through cables. For details on cables,
see Appendix A.
Cisco 806 Router Hardware Installation Guide
2-6
Table 2-1 lists the Ethernet devices you can connect to the router, the connections
for each device, and the settings of the router TO HUB/TO PC button (the default
setting is IN).
Network
Device
Button
1
Setting Router Port
MDI (IN) ETHERNET port 4
MDI-X ETHERNET port 4
(OUT)
MDI-X ETHERNET port 4
(OUT)
ETHERNET port 4
Chapter 2
Router
Ethernet Cable HUB/NO HUB
2
Type Button Setting
Straight-through IN
Straight-through OUT
Straight-through OUT
Straight-through OUT
Installation
78-10432-01