Cabling Specifications; Ethernet Cable Specifications - Cisco 806 Installation Manual

Cabling Specifications

Cabling Specifications

Ethernet Cable Specifications

Cisco 806 Router Hardware Installation Guide
A-4
The Console port is configured as a data communications equipment (DCE)
device. The default parameters for the console port are as follows:
9600 baud
•
• 8 data bits
No parity
•
• One stop bit
Table A-4 Power Connector Pinouts
Pin Function
1 ROF
2 RTN
3 N.C.
4 N.C.
5 +5
6 RTN
7 N.C.
8 N.C.
This section provides specifications for the following Ethernet cables, which you
might need to provide:
Straight-through
•
• Crossover
It also provides information on Ethernet cable distance limitations.
Table A-5 provides the specifications for straight-through and crossover Ethernet
cables. See the Glossary for definitions of straight-through and crossover cables.
Appendix A Specifications and Cables
78-10432-01