Preventing Router Damage; Installing Your Router - Cisco 806 Installation Manual

Chapter 2 Installation

Preventing Router Damage

Installing Your Router

78-10432-01
Follow these guidelines when connecting devices to your router:
• Connect the color-coded cables supplied by Cisco Systems to the color-coded
ports on the back panel.
• If you must supply your own cable, see Appendix A for cabling
specifications. If this appendix does not provide specifications for a particular
cable, we strongly recommend ordering the cable from Cisco Systems.
To install the Cisco 806 router, you need to perform these tasks in the following
order:
Connect the Ethernet devices to the router.
•
• Connect the router to a broadband modem or Ethernet switch.
Connect a terminal or PC to the router (for software configuration using the
•
command-line interface [CLI] or troubleshooting).
Connect the router to the power source.
•
Verify the router installation.
•
• Mount the router.
Cisco 806 Router Hardware Installation Guide
Preventing Router Damage
2-5