Power Supply Preparation - Nextar X3-02 - Automotive GPS Receiver Hardware Instruction Manual

Using the Car Adaptor
The unit is supplied with a Car Adaptor for powering it while in a vehicle.
Connect the Car Adaptor Power Plug to
the unit's power jack and plug the other
end to the vehicle's 5V accessory/
cigarette socket, as shown on the right
figure.
Attention
 Place the unit in a proper position for viewing.
 Disconnect the unit from the Car Adaptor when starting the vehicle.
Your portable GPS unit comes with a built-in rechargeable battery. Please see details in
the following segment.
Working conditions and precautions for the rechargeable battery
 Battery should only be used and charged when temperatures are between
32-100F.
 Maintain well-ventilated conditions around the product to avoid overheating. Don't
put the product on a bed, sofa or anything that may block ventilation to the product.
 When the battery is weak, an indication menu will appear on the LCD screen and
the unit will power off automatically after a while.
Charging the Battery Pack
The battery must be charged by using the supplied Car Adaptor.
Power Supply
Preparation
9