Nextar X3-02 - Automotive GPS Receiver Hardware Instruction Manual page 14

X3-02 hardware manual

Hide thumbs Also See for X3-02 - Automotive GPS Receiver:

Table of Contents

Calibrate

Tap

in the settings menu to calibrate, the screen will display as below:

This item is used to calibrate the sensitivity of the touch screen. Tap the center of "+" as it

moves around the screen. If you touch the center of "+" every time, it will disappear after

having moved through a cycle (center→top left→bottom left→bottom right→top right).

Tap the screen to return to the settings menu.

Note: If "+" doesn't disappear, you should calibrate again.

Volume

Tap

in the settings menu to enter Volume settings menu for volume adjusting, as

shown below:

Tap the  buttons to adjust the volume. Then tap  to confirm or tap  to cancel.

General Setup

Table of Contents