Power Supply Preparation - Nextar X3-02 Owner's Manual

Power Supply
Preparation
Using the AC Adaptor
The player is supplied with an AC adaptor for powering the unit and charging the battery.
1. Connect AC adaptor to the right side
of the player in the jack marked DC
5V IN, as shown on the right.
2. Plug the two-prong end of the power
cord into a grounded electrical
outlet.
Note:
Turn player's power off before unplugging.
In the case of using the adaptor, the LCD screen will be brighter than with the
rechargeable battery.
Using of Car Adaptor
The player is supplied with a Car Adaptor for powering the unit while in a vehicle.
Connect the Car Adaptor Power Plug to
the unit's power jack and plug the other
end to the vehicle's 5V accessory/
cigarette socket, as shown on the right
figure.
Attention
Place the unit in a proper position for viewing.
Disconnect the player from the Car Adaptor when starting the vehicle.
Your portable GPS player comes with a built-in rechargeable battery. Please see details
in the following segment.
10