Customizing preferences
2
Touch the color you want.
Available options;
! Colored keys — Selects the desired preset
color
! Memory 1/Memory 2/Memory 3 — Col-
ors registered in the memory
= For details, refer to Creating a user-de-
fined color and storing it to memory on
this page.
! Scan — Shifts between the eight default
colors in sequence gradually.
Creating a user-defined color and
storing it to memory
You can create a user-defined color and set it
as the illumination color.
Touch [Illumi Color] on the "System Set-
1
tings" menu.
= For details, refer to Displaying the "System
Settings" menu on page 155.
2
Touch [Custom].
p If [Scan] is set, [Custom] cannot be se-
lected.
3
Touch [+] or [–] to adjust the values for
Red, Green and Blue to create a favorite
color.
Watch the illumination of hardware keys while
adjusting the color.
Each time you touch [+] or [–] increases or de-
creases the value of the selected item. +31 to
+00 is displayed as the value is increased or
decreased.
Current color balance
p An entry cannot be stored with all of the va-
lues set to "+00".
4
Touch [Memory 1], [Memory 2] or
[Memory 3] to store the illumination color.
5
Touch
to return to the previous
screen.
Checking the version information
1
Touch [Service Information] on the
"System Settings" menu.
= For details, refer to Displaying the "System
Settings" menu on page 155.
2
Check the version information.
Restore Factory Settings
Resets various settings registered to the navi-
gation system and restores them to the default
or factory settings.
p Some data remains. Read Returning the na-
vigation system to the default or factory set-
tings before you operate this function.
= For more detailed information about the
items which would be erased, refer to
Returning the navigation system to the
default or factory settings on page 175.
Chapter
25
159
En