Selecting A Sirius Channel Directly; Display The Radio Id - Pioneer AVIC-X9115BT Operation Manual

Chapter
22 Using the SIRIUS tuner
Category Mode
1 Memorize the current song
= For details, refer to Memorizing the song
on the next page.
2 Switch the SIRIUS Instant replay mode
= For details, refer to Using the "Instant
Replay" function on page 138.
3 Recall equalizer curves
= For details, refer to Recalling equalizer
curves on page 161.
4 Display the "Function" menu
= For details, refer to Using the "Function"
menu on page 138.
5 Recalling channels from the preset
Touch to recall the preset channel.
Storing broadcast stations
You can register the channel currently
being broadcast to the preset list.
6 Perform manual tuning
The channels move up or down one at a
time.
p If you keep touching [c] or [d] you can
skip the broadcasting channels.
7 Select a SIRIUS band
Touch [Band] repeatedly until the desired
SIRIUS band is displayed, SIRIUS 1,
SIRIUS 2, or SIRIUS 3. This is useful for
switching the preset.
8 Display the map screen
9 Preset key for receiving the traffic
audio service
= For details, refer to Using the direct traffic
announcement function on the next
page.
136
En
1 2 3 4
d
6
7
8
9 a b c
a Switch the SIRIUS channel select
mode
You can switch the mode between the two
methods for selecting and listing the chan-
nel.
All Ch Mode:
You can select a channel from all channels
when you operate this function.
Category Mode:
You can select a channel within a selected
category that you operate this function.
b Select a SIRIUS channel directly
= For details, refer to Selecting a SIRIUS
channel directly on this page.
c Switch the SIRIUS display
Each touch of [Disp] changes the display
information.
Channel number — Channel name —
Channel category — Artist name/feature —
Song/program title — Composer
d Switch the channel category
Touch [c] or [d] to select the desired cate-
gory.

Selecting a SIRIUS channel directly

You can select a SIRIUS channel directly by
entering the desired channel number.
1 Touch [Direct].
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers, touch [Clear].
3 While the input number is displayed,
touch [Enter].
The SIRIUS channel that was entered se-
lected.
4 Touch .
You return to the previous display.

Display the Radio ID

If you select CH: 000, the Radio ID is dis-
played.