Selecting A Sirius Channel Directly; Display The Radio Id; Storing And Recalling Broadcast Stations - Pioneer AVIC Z120BT Operation Manual

Using the SIRIUS tuner
= For details, refer to Memorizing the song
on the next page.
5 Recalls channels from the preset
Tap to recall the preset channel.
= For details, refer to Storing and recalling
broadcast stations on this page.
6 Switches the SIRIUS display
Each touch of [Disp] changes the display in-
formation.
Channel number — Channel name — Chan-
nel category — Artist name/feature — Song/
program title — Composer
7 Recalls equalizer curves
= For details, refer to Using the equalizer
on page 172.
8 Displays the "Function" menu
= For details, refer to Using the
"Function" menu on page 143.
9 Switches the SIRIUS channel select
mode
You can switch the mode between the two
methods for selecting and listing the channel.
All CH Mode:
You can select a channel from all channels
when you operate this function.
Category Mode:
You can select a channel within a selected ca-
tegory that you operate this function.
a Switches between the AV operation
screen and the preset list display
You can switch the screen display according
to your preference.
= For details of the operation, refer to
Switching between the AV operation
screen and the list screen on page 77.
b Selects a SIRIUS band
Tapping the key repeatedly switches between
the following SIRIUS bands: SIRIUS1,
SIRIUS2, or SIRIUS3.
p This function is convenient for preparing
different preset lists for each band.
c Switches the channel category
Touch [c] or [d] to select the desired cate-
gory.

Selecting a SIRIUS channel directly

You can select a SIRIUS channel directly by
entering the desired channel number.
1 Touch [Direct].
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers one by one,
touch . Touching and holding
to delete all input numbers.
3 While the input number is displayed,
touch [Enter].
The SIRIUS channel that was entered se-
lected.
4 Touch .
You return to the previous display.

Display the Radio ID

If you select CH: 000, the Radio ID is dis-
played.
1 Touch [Direct].
2 Input [000] and then touch [Enter].
If you select another channel, display of the
Radio ID is canceled.
3 Touch .
You return to the previous display.
4 Wait until the Radio ID is displayed.
Storing and recalling broadcast
stations
With a tap of any of the preset tuning keys
("Preset 1" to "Preset 6"), you can easily store
up to six broadcast stations for later recall
(also with the tap of a key).
1 Select the channel that you want to
store in memory.
Chapter
28
allows you
141
En