Basic Operations - Kenwood KDC-108 Instruction Manual

Basic operations
Loading slot
Remote sensor
• Do not expose to bright sunlight.
Volume knob
Detaches the faceplate
The following indicator lights up when ...
ST:
A stereo broadcast is received (FM).
IN: A disc is in the unit.
Display window
Ejects the disc
Auxiliary input jack
Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to
observe this precaution may result in damage to the monitor or unit.
Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a
cotton swab or cloth.
Handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove the rims from the center hole and disc edge before inserting a disc.
4