Function Settings - Kenwood KDC-108 Instruction Manual

Function settings
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
• See table below for selection.
• Repeat step 3 until the desired item is selected/activated.
• Press
~
to return to the previous item.
4 Hold ~ to finish the procedure.
[AUDIO CTRL] : While listening to any source except in STANDBY state...
SUB-W LEVEL -15 - + 15 (Preset: 0): Adjusts the subwoofer output level.
BASS BOOST B.BOOST LV1
*1
B.BOOST LV2: Selects your preferred bass boost level.; OFF: Cancels.
SYSTEM
Q
NATURAL
*1
USERI ROCK! POPSI EASY
ITOP401
JAZz/ GAME: Selects apreset sound mode suitable to the
music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS LEVEl
MID LEVEl
TRE LEVEl
BALANCE
FADER
SUB-WSET
DETAIL SET
-8 - +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before making an
adjustment, select the source you want to adjust.)
L15 - R15 (Preset: 0): Adjusts the left and right speaker output balance.
R15 - F15 (Preset: 0): Adjusts the rear and front speaker output balance.
ON *: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUB-W: THROUGH*: All signals are sent to the subwoofer. ; 85Hz/120HZI 160HZ: Frequencies
higher than 85 Hz/ 120
HzI
160 Hz are cut off.
SUB-W PHASE: REV (180°)/ NORM (00)*: Selects the phase angle of the subwoofer output to be in line
with the speaker output for optimum performance. (Selectable only if asetting other than
[THROUGH] is selected for [LPF SUB-W].)
SUPREME SET: ON*: Creates realistic sound by interpolating the high-frequency components that are lost
in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/
WMA disc.)
VOL OFFSET: -8 - +8 (for AUX) ; -8 - 0 (for other sources): Presets the volume adjustment level of
(Preset: 0) each source. The volume level will automatically increase or decrease when you change the
source. (Before making an adjustment, select the source you want to adjust.)
• [SUB-W LEVEU SUB-W
SETI
LPF SUB-WI SUB-W PHASE] is selectable only if [SWITCH'PRE] is set to [SUB-W]. (page 6)
• [SUB-W LEVEU LPF SUB-WI SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].
[SETIINGS]
AUXNAME
CLOCK
DISPLAY
10
AUX*
I DVDI
PORTABLEI GAMEl VIDEOI TV: Selects the desired name for the connected component.
(Selectable only if"AUX" is selected as the source.)
ClOCK ADJ: (For details, see page 6.)
DIMMER SET: ON: Dims the display illumination. ;OFF*: Cancels.
TEXT SCROLL: AUTO*
I
ONCE: Selects to scroll the display information automatically, or scroll only once. ;
OFF: Cancels.