Listening To The Radio; Adjust [Setiings] Mode Settings - Kenwood KDC-108 Instruction Manual

Listening to the radio
Hold for about 2 seconds to memorize the current station.
• Press briefly to recall memorized station.
1 Press
~
SRC to select "TUNER."
2 Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM).
3 Press
~
/
~
to search for a station.
Adjust [SETTINGS] mode settings
While listening to the radio...
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4 Hold
~
to finish the procedure.
SEEK MODE Selects the tuning mode for
~
/
~
buttons.
AUTOl *: Automatically search for astation.; AUT02: Search in the order of the stations in the preset
memory.; MANUAL: Manually search for astation.
AUTO MEMORY YES: Automatically starts memorizing 6stations with good reception. ; NO*: Cancels (automatic
memorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 6)
MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ;OFF*: Cancels (stereo effect resumes).
Using the remote controller (RC-40S)
FM+ / AM- : Selects band.
~ I ~
(+) : Selects station.
1 - 6 : Selects preset station.
7